MIL-D-19326G (NOTICE 1)
作者:标准资料网 时间:2024-05-07 10:11:06 浏览:8784
来源:标准资料网
MIL-D-19326G (NOTICE 1), MILITARY SPECIFICATION: DESIGN AND INSTALLATION OF LIQUID OXYGEN SYSTEMS IN AIRCRAFT, GENERAL SPECIFICATION FOR (23 JUL 1997) [SUPERSEDING MIL-I-9475A]., This notice should be filed in front of MIL-D-19326H, dated 31 August 1990.MIL-D-19326H is inactive for new design and is no longer used, except for replacementpurposes.
Product Code:SAE AMS3375
Title:Adhesive/Sealant, Fluorosilicone Aromatic Fuel Resistant, One-Part Room Temperature Vulcanizing
Issuing Committee:Ams G9 Aerospace Sealing Committee
Scope: This specification covers a one-part fluorosilicone (FVMQ) adhesive/sealant, supplied in cartridges, suitable for extrusion and curing to an elastomeric material upon exposure to air. It also covers a compatible primer.This adhesive/sealant has been used typically for bonding cured fluorosilicone rubber and for sealing applications requiring resistance to fuels, oils, or solvents from -65 to +400 degrees F (-54 to +204 degrees C). but usage is not limited to such applications. This product should not be used for fay surface sealing or similar applications where exposure to air cannot be maintained. This product should not be used in thicknesses greater than 0.25 inch (6.4 mm), particularly in applications involving encapsulation.
Rationale: This specification covers a one-part fluorosilicone (FVMQ) adhesive/sealant, supplied in cartridges, suitable for extrusion and curing to an elastomeric material upon exposure to air. It also covers a compatible primer.This adhesive/sealant has been used typically for bonding cured fluorosilicone rubber and for sealing applications requiring resistance to fuels, oils, or solvents from -65 to +400 degrees F (-54 to +204 degrees C). but usage is not limited to such applications. This product should not be used for fay surface sealing or similar applications where exposure to air cannot be maintained. This product should not be used in thicknesses greater than 0.25 inch (6.4 mm), particularly in applications involving encapsulation.【英文标准名称】:Specificationforthermosettinginsulatedcables(non-armoured)forelectricpowerandlightingwithlowemissionofsmokeandcorrosivegaseswhenaffectedbyfire
【原文标准名称】:受火源影响时发轻烟和腐蚀性气体的电力和照明设备用的热固绝缘(非铠装的)电缆规范
【标准号】:BS7211-1989
【标准状态】:作废
【国别】:英国
【发布日期】:1989-09-29
【实施或试行日期】:
【发布单位】:英国标准学会(BSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:K13
【国际标准分类号】:
【页数】:20P;A4
【正文语种】:英语
